The Gen5 Glock 30 was one of the pistols that spurred us to create the MAG-ADAPT line of magazine adaptor sleeves. Gen5 brought a dramatic improvement to the platform, but all the other adaptors on the market were designed for both the 10mm and .45 ACP magazines. This is an issue in the there is a .005″ different between the 10mm and 45 ACP. . In the world of a magazine sleeve .005″ is a lot and leads to sliding and unanticipated movement. In our world, there is zero place for that. We make tools to protect your home.

If you are looking to load up here is a great value on a Glock factory 45 ACP magazine and our MAG-ADAPT 30-13. This set up will give you the ultimate Glock 30 extended mag with full hand support. Our texture and scallop give you optimized blind index for magazine changes. This is the end all be all for the best compact 45 APC on the market!

The fit of the magazine adaptor was optimized as the best Gen 5 Glock 30 extended mag. Filing may be required for prior generations. For 10mm check out our MAG-ADAPT 29-15 here, but this product will not fit the Glock 30.

Compatibility Chart:

Will Not Ship to: CA, CT, DC, HI, MA, MD, NJ, NY, OR, RI, WA

The post Glock Factory 45 ACP 13-round w/Mag-Adapt 30-13 | Glock 30 Extended Magazine appeared first on XTech Tactical.

The XTech MAG-ADAPT 30-13 is the ONLY dedicated Glock 30 magazine sleeve on the market. Why is ours dedicated to 45 ACP only? The 45 ACP Glock magazines are .005″ larger than the 10mm magazines. Which equates to the sleeve not being tight on the magazine, which is our world is a no go! 

If you are looking for unmatched texture, quality and durability we have you covered with the ultimate Glock 30 magazine adaptor. The adaptor when installed onto a 13 round Glock 45 ACP magazines gives you the ideal Glock 30 mag extension.

-Plus 3 Glock 30 magazine extension when installed on a 13 round 45 ACP Glock Magazine

-Optimized for Glock 30 Gen5, may require filing for prior generations

-Optimized for use with Glock factory magazines

Lifetime warranty and MADE in Arizona! You won’t be disappointed just like we weren’t with our Gen5! Use with a 13rd ACP mag for the ideal Glock 30 mag extension. The precision tight fit avoids pinching your hand; other brands move up and down freely and cause problems. 

The looks and design will make our MAG-ADAPT 29-15 a staple and the ideal set up for back up magazines for full size carry!

No Shipping Restrictions 

The post XTech Mag-Adapt 30-13 | Glock 30 Magazine Sleeve appeared first on XTech Tactical.

Designed to fit all Mil-Spec receivers without removing ANY parts from your lower. We created the Digital variant so that you can easily mark your caliber, name your rifle, or even communicate with your people. Caliber marking on a mil-spec receiver is a serious thing if you have ever been out to the range with friends and have something like a 300blk and a 556 AR and mags in the same area. That’s where this idea came from but it became very clear to us quickly that these are a great chance to have fun, express yourself and bring some life to your builds.

Back to serious specs….

Built Stronger, By Design

Not only is the X-Flare injection molded, we took these to an entire next level with the use of a custom compounded material frankly because we could. We also tooled up and sonic weld the brass inserts in place vs heat staking. No corners were cut here and this is hands down the best AR magwell on the planet!

Designed for the Modern Shooter

At XTech Tactical we firmly believe EVERYTHING has pros and cons. And the right choice for one is not for all. Let’s be clear on what we see as the cons for adding the X-Flare to your platform. #1. It’s not free. #2. It adds weight… 28.5 grams to be exact aka .0628 lbs or 1 oz.

Now for the Pros: #1. Improves loading dramatically, #2. Best value on the planet (less than popular printed options and way less than machined or Billet Receivers) #3. Looks great. #4. Installs in minutes

Duty-Ready Without the Downsides

The X-Flare is built for serious users that view their AR/M4 platform as tools for a job. No compromise period. If you can handle the cost at 1oz of weight then this is the ultimate accessory to upgrade your AR15.

Caliber Markings & What’s Coming Next

At launch we have the Digital version on this listing and the pre-marked 556 variant you can find here

The Why Behind the X-Flare™

The market for a tastefully designed AR 15 flared magwell has been well established for several years. While most of the options previously on the market do enhance the surface area for insertion and general look good, we were unable to find any that met the needs of our customers. We create products for hard use while offering a great value to the customer. Simply stated after buying everything we did, nothing checked the boxes for us.

The X-Flare is everything you would expect from XTech Tactical in that our AR15 flared magwell is ridiculously durable, the cost is the best in the market considering its durability, & installation is incredibly simple.

Issues with 3D Printed Solutions

Candidly, we are huge fans of 3D Printing and use it in mass production on most of our pistol magazine sleeves. The reason we use MJF for these sleeves is that it passes our checklist: #1 failure won’t take you out of the fight, #2 the sleeve does not receive the impact on any reasonable drop, #3 niche markets with a ton of variance needed for magazine sleeves compared to AR15 Mil-Spec. The advantage of 3D printing is no tooling cost which allows for a very low capital investment (low barrier to entry for the manufacture) and ease of making many variants. However, comparing 3D printing to a well executed injection molded part, the strength profile is exponentially improved with molding. The biggest issue with additive manufacturing compared to injection molding is impact strength and material stability. Injection molding a thermoplastic allows cross linking and control over the reinforcement glass fibers, whereas, 3D printing merely fuses particulars together with very limited control. The final issue with additive manufacturing for an AR15 magwell is the gritty textured surface that comes with MJF and SLS. By using injection molding we are able to have a smooth inside of the funnel and a great texture on the outside.

HRF Concepts was the first to our knowledge to make a mass production 3D printed magwell and has now inspired more manufacturers than we can keep track of to follow suit. These look the part but we don’t see a place for today’s 3D Printing/Additive manufacturing technology on an impact point of a battle rifle.

Issues with Aluminum Machined Solutions

Aluminum is obviously plenty strong for this application so lack of strength is a non-issue from the lens of durability. The biggest problems we encountered were fitment due to the lack of flex, weight being 2.5x more, and wearing off the finish on the lowers whether anodized or Cerakote. The final issue is the cost with the options we studied being well over 2x the cost of our X-Flare.

Why We Think Injection Molding Is the Best Solution

Injection molding wins on appropriate strength, features, and cost. Strength is exponentially stronger vs 3D printing / additive manufacturing, while also not risking damaging the weapon system like billet aluminum. The product weight is similar to the 3D Printed options while being half that of the aluminum options. Features and looks we could include had zero compromise. Finally, our production price once the tooling was paid for is better than both 3D printing or machining, so making the X-Flare in the US while giving our customers a great value is now a reality!

If the X-Flare AR15 Magwell flare fits loose on your receiver, we recommend some small strips of grip tape or electrical tape placed on the front surface of the inside of the magwell.

For the confirmed fitment spreadsheet click here.

The post X-Flare Digital Mil-Spec Magwell BLK | AR-15 / M4 Magwell appeared first on XTech Tactical.

With this new rear piece paired with your current front housing, your X-Flare 556 will now function with Gen 3 Pmags and other mags like Tango Down that feature an over travel stop. Also if you ran into any scenarios where on certain lowers, mags weren’t dropping free, this will solve that as well.

We strive to make the best products possible and somehow we missed what feels like an obvious need here when we shipped initial production to TacPack. If you don’t run a select few magazines, you likely had zero issues. In an effort to show our best hand in support for the TacPack community we are offering this replacement part at no charge.

If you are looking for more magwells click here

To see our new Digital Matrix variant click here

This is not a complete magwell and of no value unless you received the May 2026 TacPack.

The post XTech Tactical Updated X-Flare Rear Housing appeared first on XTech Tactical.

This upgraded-over-factory 20-round extended Glock 17 mag matches the Glock 17, 19x, 34, 45, & 49,  perfectly, however, it literally fits ANYTHING that takes 17 round Glock-style magazine. 100% compatible with every magwell on any pistol that takes Glock 15 round mags. This includes: the PSA Dagger, Ruger RXM Full Size, Fusion Firearms, Staccato, Shadow Systems MR920, Polymer 80 options, and many more. THERE ARE NO KNOWN MAGWELLS THESE MAGAZINES WILL NOT FIT. The only known fitment issue is the lanyard loop on the 19x must be removed to allow magazine to seat. 

Styling wise, this product looks clean and matches the grip texture of most Glock pistols. The texture is slightly more pronounced to provide a perfect grip. We add the Scallop cut to the side for instinctual blind indexing when doing magazine changes. Unlike other extension kits on the market the MAG17 EXT uses our MTX 17 +5 that uses FIVE unique points of engagement to attach to the magazine body. This magazine will pass over a dozen consecutive fully loaded drop tests at 5′ to concrete. If you know XTech Tactical, you know we overbuild EVERYTHING we make, and true to our flagship MAG line up the MAG17 EXT is no different!

Just like with our other top-quality magazines for Glock, we listened to our client base and this magazine is upgraded over OEM options with:

• A stronger and longer-lasting, power 17-7 stainless steel spring vs OEM Glock music wire
• Our enhanced Delrin® No-Stick™ Proprietary Follower vs common nylon thermoplastics
• Our enhanced baseplate features unmatched durability, side scallops for extraction
• Side Scallop for ease of blind indexing
• Enhanced texture and front and rear tread for unmatched overall handling

THE ULTIMATE LIFETIME WARRANTY: These magazines are built to last… period. Our only exception is internet click bait for completely unrealistic tests. If you use our product like you would any workhorse magazine, we 100% will replace the magazine period. These are magazines you buy once and buy more if you want more. These are intended to be passed down to the next generation!

FITS USPSA limited class gauges
WILL NOT SHIP TO CA, CO, CT, DE, DC, HI, IL, MA, MD, NJ, NY, RI, VT, WA

The post XTech MAG17 EXT | 22-round Extended Mag 9mm for Glock 17 appeared first on XTech Tactical.

We took everything we have learned from designing magazine extensions and applied it here to deliver our best Glock 17 extension to date. Compared to our previous designs, we have fully dialed in magwell compatibility. Whether you simply agree with us that most back up mags should be higher capacity or you are carrying on duty, this is your answer! No set screws or goofy spring pins and built to last!

Now available in a 1-pk, 2-pk & 5-pack in both Black & FDE with more colors to come throughout 2026!

Like our other extensions, the MTX 17 +5 features two key patented technologies.

Leading Edge

Our two-piece housing design allows us to incorporate a patented leading edge on the inner housing that extends into the magazine tube. This eliminates the catch point at the transition between the extension and the magazine body, ensuring flawless feeding. No other magazine extension on the market offers this design.

Why it matters

We do not believe in adding rounds at the expense of reliability. Glock, Ruger, and other major pistol manufacturers have never produced extensions beyond +2 capacity. The reason is simple… When more than two rounds are added to a double-stack magazine, the follower can exit the magazine body and catch on the way back up.

Many competitive Glock 19 magazine extension manufacturers quietly recommend grinding or shortening the factory follower to address this issue. We refuse to require any modification to factory parts. Altering the follower introduces the risk of follower tilt, which can cause feeding issues and last-round hold-open failures. We have fully solved this problem with no factory modifications required.

5 Points of Engagement

Most magazine extensions for Glock 19 rely on only two points of engagement, typically the baseplate rails plus a set screw, thin stamped retainer, or spring pin. Our design uses five:

1. Tabs on the magazine body, just like an OEM baseplate
2. The spring and spring button, again like an OEM baseplate
3. Interlocking keying features between the inner and outer housing
4. The patented leading edge on the inner housing
5. Baseplate rails engaged by the outer housing

Why it matters

No one wants a magazine extension that comes apart. The MTX 17 +5 passes over a dozen fully loaded five-foot drop tests onto concrete. We intentionally overbuild our products so you can focus on protecting your loved ones or winning your next competition with confidence.

Other Features

This Glock 17 magazine extension integrates seamlessly with our MAG 17-17 magazines and Glock factory 17-round magazines. It improves texture, ergonomics, and tactile control without compromising compatibility.

One feel in the hand makes it immediately clear this extension is in a class of its own. The external geometry supports fast magazine changes and a natural blind index, meaning you can orient the magazine without looking. This helps maintain situational awareness and confident handling. The texture, tread pattern, and side scallops work together for reliable use with or without gloves.

The MTX 17 +5 is the last magazine extension for the Glock 17 you will ever need. The only remaining question is how many (now available in 1, 2, & 5 packs!)

MADE IN USA

The Ultimate Lifetime Warranty

These extensions are built to last. Period. Our only exception is internet clickbait involving unrealistic abuse tests. If you use this product the way a duty or competition magazine is meant to be used, we will replace it. No questions.

These are magazines you buy once, and buy more only if you want more. They are built to be passed down to the next generation.

FITS USPSA limited class gauges. Fits all magwells, Fits all pistols that accept 15 round flush fit Glock 19 style magazines. 

Works with OEM Glock magazines & XTech Tactical MAG17-17 & MAG17-17

WILL NOT FIT non-Glock magazines such as: MAGPUL, Promag, ETS, Amend2, Hexmag, Mecgar & others.

WILL NOT SHIP TO CA, CO, CT, DE, DC, HI, IL, MA, MD, NJ, NY, RI, VT, WA

The post MTX 17 +5 9mm | Glock 17 Mag Extension for 17rd magazines (9mm) appeared first on XTech Tactical.

Like the name suggests, this package includes a factory 17-round magazine and the MAG-ADAPT S365-17 magazine sleeve — both in a rugged coyote finish. Together, these are designed to enhance your shooting experience and provide extended capacity while also improving your grip and control over the weapon.

The factory 17-round SIG Sauer magazine ensures reliable feeding and performance, and it’s an excellent upgrade for those seriously looking to increase the firepower of their standard P365 pistol. While not as ideal for concealed carry, this magazine is perfect for target shooting at the range, home defense, or tactical situations — and the coyote finish gives it a distinct, purpose-built look to match a growing number of coyote-colored pistols and accessories.

The included SIG P365 17-round magazine extension sleeve in coyote is designed to seamlessly fit over the 17-round magazine. It provides a more ergonomic and comfortable grip, built specifically for the P365’s standard frame, so you’ll experience a smooth, natural feel while shooting. This sleeve is especially ideal for shooters with larger hands.

Constructed from durable, lightweight materials, the MAG-ADAPT S365-17 doesn’t add unnecessary bulk to your P365. Plus, it installs easily with no tools required — just slide it into place and you’re ready to go.

Regardless of whether you’re looking for a tactical edge or simply want to carry more rounds in your P365, the Combo 17rd P365 Magazine and MAG-ADAPT S365-17 in Coyote delivers a practical, effective solution with a coordinated finish to complete your setup.

If you want to purchase just the magazine sleeve, click here: MAG-ADAPT S365.

WILL NOT SHIP TO CA, CO, CT, DC, HI, IL, MA, MD, NJ, NY, OR, RI, VT, WA

The post Sig Sauer P365 Factory 9mm 17-round Magazine w/MAG-ADAPT S365 Coyote appeared first on XTech Tactical.

The factory 17-round magazine from SIG Sauer offers exceptional reliability and increased round capacity for your P365X or P365XL. Regardless of whether you’re using it for personal defense or spending time at the range, this magazine is designed to ensure seamless feeding and flawless performance. So if you’re looking for a P365X 17-round mag conversion, this is the perfect option for expanding your firepower without sacrificing the inherently compact nature of this popular pistol — now available in a distinctive coyote finish to match your setup.

Complementing the extended magazine is the MAG-ADAPT S365-17XL magazine sleeve in coyote, designed to integrate seamlessly with the magazine to enhance your grip. Installation is fast and requires no tools. It’s especially useful for those who prefer the added control of a pinky extension or have larger hands. The sleeve provides a smooth and ergonomic fit to help ensure a natural feel while holding the pistol.

As a result, this sleeve will enhance your handling and stability whether you’re in a tactical scenario or a high-pressure self-defense situation — all while delivering a cohesive, purpose-built look in coyote.

All in all, the Combo 17rd P365 Magazine and MAG-ADAPT S365-17XL in Coyote is an excellent choice for anyone seeking a Sig Sauer P365X magazine extension that offers an improved grip, additional firepower, and a coordinated finish to complement a coyote-colored pistol or accessories.

If you want to purchase just the magazine sleeve, click here: MAG-ADAPT S365XL.

WILL NOT SHIP TO CA, CO, CT, DC, HI, IL, MA, MD, NJ, NY, OR, RI, VT, WA

The post Sig Sauer P365 Factory 9mm 17-round Magazine w/MAG-ADAPT S365XL Coyote appeared first on XTech Tactical.

Compatibility Chart:

If you are looking for just the sleeve click here, and if you want to check out our other magazines click here.

If you are looking for a great magazine loader for the VP / P30 series check our LDR2000 that works great here.

The magazine sleeve will not fit with magwells. LIFETIME Warranty

This exceptional 17-round magazine sleeve is legal in all markets.

Will NOT Ship to: CA, CO, CT, DC, HI, IL, MA, MD, NJ, NY, RI, VT, WA

The post Heckler & Koch VP9 / P30 Factory 9mm 17-round magazine w/MAG-ADAPT HSK-17 for SK pistols appeared first on XTech Tactical.

Get one of the best Kel-Tec Sub 2000 accessories on the market which gives you full hand support and 17 rounds of pew! Upgrade your setup with an all-new extended mag with adaptor sleeve designed specifically for your Glock mag powered Sub2000 chambered in 9mm. Engineered for both function and appearance, this setup delivers a seamless OEM-style fit including our legendary XTech Tactical 17-round magazine.

The integrated sleeve features a KelTec-style textured finish designed to closely match the factory look and feel of your firearm, creating a clean, flush-fit appearance with no unsightly gap between the pistol grip and extended magazine. This set up provides you a complete grip when running your Sub2000 with these Kel-Tec Sub2000 mags.

Each package includes:

• (1) Complete XTECH Tactical 17-round mag
• Pre-installed matching sleeve
• Ready-to-use assembly right out of the box

No assembly required — simply load up and head to the range.

Features:

• OEM-style flush fit appearance
• Eliminates the gap between grip and magazine
• Textured sleeve designed to match factory styling
• Reliable XTECH Tactical 17-round magazine included
• Designed for Glock 17 / Glock 17-style platforms and Sub2000 9mm compatibility

Built for shooters who want factory-style fitment with upgraded performance.

Compatibility Chart:

Extending the grip on 17-round magazines will give users heightened shooting control when paired with our MAG17-17 top-quality magazine. The MAG17-17 features everything you get in a factory Glock magazine PLUS:

• Our +power 17-17 Stainless Steel Spring vs the OEM music wire
• Our enhanced Delrin® No-Stick™ Proprietary Follower 
• Our enhanced baseplate, side scallops for extraction, and marking dimples
• Our lower-than-Glock-factory price 

If you are looking for just the sleeve click here, and if you want to check out our other magazines click here.

LIFETIME Warranty

This exceptional 17-round magazine sleeve is legal in all markets.

Will NOT Ship to: CA, CO, CT, DC, HI, IL, MA, MD, NJ, NY, RI, VT, WA

The post XTech MAG17 S2K | 9mm 17 Round Keltec Sub2000 Magazine appeared first on XTech Tactical.